Contact
+49 711 685 69893
+49 711 685 66072
Email
Pfaffenwaldring 9
70569 Stuttgart
Deutschland
Room: 9.1.255B
2025
- S. Teves et al., “Impact of Optical Diffuser Vats on Surface Roughness in DLP Printed Optical Components,” in Innovative Produktentwicklung durch additive Fertigung, R. Lachmayer, M. Oel, and S. Kaierle, Eds., Berlin, Heidelberg: Springer Berlin Heidelberg, 2025, pp. 151–160. doi: https://doi.org/10.1007/978-3-662-71380-8_8.
- P. Xia et al., Robust design for 3D-printed optomechanical systems. DGaO Proceedings, 2025. [Online]. Available: http://www.dgao-proceedings.de
- J. Trapp et al., “Dual fiber probe with 3D-printed micro-lens for Brillouin microscopy,” APL Photonics, vol. 10, Art. no. 4, Apr. 2025, doi: 10.1063/5.0238060.
2024
- Q. Min et al., “Varifocal Metalens for Compact and Accurate Quantitative Phase Imaging,” ACS Photonics, vol. 11, Art. no. 7, Jul. 2024, doi: 10.1021/acsphotonics.4c00658.
2023
- M. Raza, Y. Chen, J. Trapp, H. Sun, X. Huang, and W. Ren, “Smoldering peat fire detection by time-resolved measurements of transient CO2 and CH4 emissions using a novel dual-gas optical sensor,” Fuel, vol. 334, p. 126750, Feb. 2023, doi: 10.1016/j.fuel.2022.126750.
- J. Wu et al., “Linear scalability of dense-pattern Herriott-type multipass cell design,” Applied Physics B, vol. 129, Art. no. 6, May 2023, doi: 10.1007/s00340-023-08031-w.
