Konferenzbeiträge

Auf dieser Seite finden sie die neuesten Konferenzbeiträge des ITOs.

true" ? copyright : '' }

  1. 2025

    1. W. Osten et al., “The reconstruction, testing, and improvement of a historical giant astronomical telescope,” in Ultra-High-Definition Imaging Systems VIII, S. Miyata, T. Yatagai, and Y. Koike, Eds., SPIE, 2025, p. 1338902. doi: 10.1117/12.3040884.

  2. 2024

    1. V. Aslani, T. Haist, S. Thiele, and A. Herkommer, “Endoscopic measurement system for elastographic tissue differentiation based on active triangulation and 3D-printed micro-optics,” SPIE, 2024, p. 128170E. doi: 10.1117/12.3007293.
    2. V. Aslani, A. Toulouse, M. Schmid, H. Giessen, T. Haist, and A. Herkommer, “3D-Druck von farbigen Mikrooptiken,” D. Proceedings, Ed., 2024.
    3. Ö. Atmaca et al., “Elastographic Measurements Using Fourier Transform Profilometry for Tissue Differentiation in Oncology,” in DGaO Proceedings 2024, Aug. 2024, p. P20. [Online]. Available: https://www.dgao-proceedings.de/download/125/125_p20.pdf
    4. C. Bett and W. Osten, “Detecting objects deep within scattering media via multi-wavelength intensity interferometry,” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3093
    5. C. M. Bett and W. Osten, “Illumination is all it takes: on the detection of objects embedded in scattering media via multi-wavelength speckle correlation,” in Unconventional Imaging, Sensing, and Adaptive Optics 2024, J. J. Dolne, S. R. Bose-Pillai, and M. Kalensky, Eds., SPIE, 2024, p. 131491A. doi: 10.1117/12.3027670.
    6. A. Birk, C. Bett, K. Frenner, and S. Reichelt, “Die Time-Gated Single Pixel Camera (TGSPC): Innovatives Konzept zur Objekterkennung durch streuende Medien,” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3091
    7. A. Birk, K. Frenner, and S. Reichelt, “Time-gated single pixel camera: an innovative sensor for object detection through scattering media,” in Proc. SPIE PC12900, Emerging Digital Micromirror Device Based Systems and Applications XVI, SPIE, Mar. 2024, p. PC1290006. doi: 10.1117/12.3008604.
    8. R. Chen, F. Rothermel, A. Toulouse, P. Flad, H. Giessen, and A. Herkommer, “Miniaturised 3D printed fibre-optic probe for autofluorescence detection of human plaques,” in Proceedings Volume PC12820, Endoscopic Microscopy XIX, S. Proc., Ed., 2024, p. PC128200A. doi: https://doi.org/10.1117/12.3002467.
    9. K. Doth, T. Haist, and A. Herkommer, “Miniaturisierte Holografische Doppelfalle zum optischen Einfang von Mikropartikeln,” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3076
    10. K. Doth, T. Haist, and S. Reichelt, “Towards pathogen detection with 3D-printed micro-optics in microfluidic systems,” in Proc. SPIE 12876, Laser 3D Manufacturing XI, Mar. 2024, p. 128760K. doi: 10.1117/12.3008437.
    11. P.-E. Hansen et al., “Digital twins for 3D confocal microscopy,” in Proc. SPIE 12997, Optics and Photonics for Advanced Dimensional Metrology III, SPIE, Jun. 2024, p. 129970M. doi: 10.1117/12.3016808.
    12. C. Jimenez, A. Toulouse, and A. Herkommer, “Beam shaping elements for single photon sources based on 3D printed micro-optics,” in EPJ Web of Conferences, L. De Stefano, R. Velotta, and E. Descrovi, Eds., EDP Sciences, 2024, p. 3007. doi: 10.1051/epjconf/202430903007.
    13. G. Kanagalingam et al., “Quasi Time-Optimal Path Tracking for Pneumatic Robots Considering Third-Order Actuator Constraints,” in 2024 American Control Conference (ACC), Jul. 2024, pp. 5258–5263. doi: 10.23919/ACC60939.2024.10644892.
    14. Z. Lovasz, Ö. Atmaca, C. Veil, A. Herkommer, and O. Sawodny, “Numerical Analysis of Geometric Influences in Tetrapolar Electrical Impedance Spectroscopy Using Monte Carlo Simulations,” Current Directions in Biomedical Engineering, vol. 10, Art. no. 4, 2024, doi: doi:10.1515/cdbme-2024-2106.
    15. A. Rüdinger, T. Haist, and S. Reichelt, “Hyperspectral measurement system for characterization of healthy and malignant tissue spectra,” in DGaO Proceedings, 2024.
    16. A. Savchenko, C. Pruß, and A. Herkommer, “Stepped mask interference laser exposure (SMILE),” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3090
    17. C. Schober, C. Pruß, A. Herkommer, and S. Reichelt, “Ultimate measurement speed for flexible asphere and freeform metrology: TWISS,” in Optical Instrument Science, Technology, and Applications III, SPIE, 2024, p. 1302402. doi: 10.1117/12.3025161.
    18. C. Schober, C. Pruß, and S. Reichelt, “Single-Shot Tilted-Wave-Interferometer,” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3052
    19. A. Toulouse, F. Rothermel, J. Drozella, S. Thiele, and A. Herkommer, “A 3D-printed fiber core multiplexing endoscope,” in 3D Printed Optics and Additive Photonic Manufacturing IV, G. von Freymann, A. M. Herkommer, and M. Flury, Eds., SPIE, Jun. 2024, p. 8. doi: 10.1117/12.3016279.
    20. A. Toulouse, S. Thiele, V. Aslani, and A. Herkommer, “Verfahren zum Schutz von Objektiven für neue Fotolacke in der hochauflösenden Zweiphotonenlithografie,” in DGaO Proceedings 2024, DGaO, Ed., 2024. [Online]. Available: https://www.dgao-proceedings.de/abstract/abstract_only.php?id=3069
    21. M. Zimmermann, T. Haist, and S. Reichelt, “Berechnungsmethoden für Fernfeldhologramme – Gerchberg-Saxton Erweiterungen und Stochastic Gradient Descent Optimierer,” in DGaO Proceedings 2024, 2024. [Online]. Available: https://www.dgao-proceedings.de/download/125/125_a28.pdf
    22. M. Zimmermann and S. Reichelt, “Computational hologram optimization for large holographic displays using eye pupil position,” in Optical Architectures for Displays and Sensing in Augmented, Virtual, and Mixed Reality (AR, VR, MR) V, N. Argaman, H. Hua, and D. K. Nikolov, Eds., SPIE, 2024, p. 129131C. doi: 10.1117/12.3000198.

  3. 2023

    1. S. Amann, T. Haist, A. Gatto, M. Kamm, and A. Herkommer, “Intermediate image free computed tomography imaging spectrometer,” in Photonic Instrumentation Engineering X, L. E. Busse and Y. Soskind, Eds., SPIE, 2023, p. 124280G. doi: 10.1117/12.2650096.
    2. S. Amann, T. Haist, A. Gatto, M. Kamm, and S. Reichelt, “Parallelized computed tomography imaging spectrometer,” in Digital Optical Technologies 2023, SPIE, 2023, pp. 71–77.
    3. V. Aslani, T. Haist, S. Thiele, and A. Herkommer, “Sensorsystem zur minimalinvasiven intraoperativen Gewebedifferenzierung in der Onkologie mittels endoskopischer Streifenprojektion,” in DGaO Proceedings 2023, 2023. [Online]. Available: https://www.dgao-proceedings.de/download/124/124_a28.pdf
    4. C. M. Bett, M. Daiber-Huppert, K. Frenner, and W. Osten, “Time-gated-single-pixel-camera: a promising sensor for robust object detection in adverse weather conditions for autonomously driven vehicles,” in Fifteenth International Conference on Machine Vision (ICMV 2022), W. Osten, D. P. Nikolaev, and J. (. Zhou, Eds., SPIE, 2023, p. 1270107. doi: 10.1117/12.2680031.
    5. C. M. Bett, K. Frenner, S. Reichelt, and W. Osten, “Towards image-free object detection for autonomous vehicles under harsh environmental conditions,” in Optical Measurement Systems for Industrial Inspection XIII, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2023, p. 126181C. doi: 10.1117/12.2675716.
    6. A. Birk, K. Frenner, and W. Osten, “Deep learning based compressed sensing in machine vision: an iterative approach to multi object detection,” in Fifteenth International Conference on Machine Vision (ICMV 2022), W. Osten, D. P. Nikolaev, and J. (. Zhou, Eds., SPIE, 2023, p. 1270109. doi: 10.1117/12.2683929.
    7. A. Gröger et al., “World’s smallest single-shot two-wavelength holographic endoscope for 3D surface measurement,” in Endoscopic Microscopy XVIII, G. J. T. M.D., T. D. Wang, and M. J. Suter, Eds., SPIE, 2023, p. PC123560P. doi: 10.1117/12.2662817.
    8. T. Haist, F. Lodholz, A. Faulhaber, and S. Reichelt, “Differential perspective as a nonexpensive distance sensing principle,” in Automated Visual Inspection and Machine Vision V, J. Beyerer and M. Heizmann, Eds., SPIE, 2023, p. 126230E. doi: 10.1117/12.2673618.
    9. S. Reichelt and G. Pedrini, “Digital Holography vs. Display Holography - What are their differences and what do they have in common?,” in Proceedings of the 2023 6th International Conference on Machine Vision and Applications, in ICMVA ’23. Singapore, Singapore: Association for Computing Machinery, Jun. 2023, pp. 72–80. doi: 10.1145/3589572.3589583.
    10. C. Schober, L. Lausmann, K. Treptow, C. Pruss, and S. Reichelt, “Complex illumination system for fast interferometric measurements,” in EPJ Web of Conferences, B. Kibler, G. Millot, and P. Segonds, Eds., EDP Sciences, 2023, p. 2002. doi: 10.1051/epjconf/202328702002.
    11. C. Schober, L. Lausmann, K. Treptow, C. Pruss, and S. Reichelt, “Neue Designmöglichkeiten durch Zweiphotonenlithographie für ein RGB-Interferometer-Beleuchtungsmodul,” DGaO Proceedings, 2023.
    12. J. Schüle et al., “In-plane Strain Analysis by Correlating Geometry and Visual Data Through a Gradient-Based Surface Reconstruction,” in 2023 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), Jul. 2023, pp. 1–6. doi: 10.1109/EMBC40787.2023.10340777.
    13. P. Somers et al., “An Enhanced Synthetic Cystoscopic Environment for Use in Monocular Depth Estimation,” in 2023 45th Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), Jul. 2023, pp. 1–4. doi: 10.1109/EMBC40787.2023.10340303.
    14. V. Vierhub-Lorenz et al., “Development of a LiDAR system for low visibility conditions,” in Optical Measurement Systems for Industrial Inspection XIII, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2023, p. 126181A. doi: 10.1117/12.2673772.

  4. 2022

    1. J. Drozella et al., “Micro-3D-printed multi-aperture freeform ultra-wide-angle systems: production, characterization, and correction,” in Laser-based Micro- and Nanoprocessing XVI, A. Watanabe and R. Kling, Eds., SPIE, 2022, p. 119890V. doi: 10.1117/12.2609844.
    2. F. Fischer, A. Birk, K. Frenner, and A. Herkommer, “FeaSel-Net: A Recursive Feature Selection Callback in Neural Networks,” May 2022, doi: 10.36227/techrxiv.19803520.v1.
    3. F. Fischer, K. Frenner, and A. M. Herkommer, “Sparse Mid-Infrared Spectra Enable Real-time and In-vivo Applications in Tissue Discrimination,” EPJ Web of Conferences, vol. 266, p. 2004, 2022, doi: 10.1051/epjconf/202226602004.
    4. A. Groeger, G. Pedrini, D. Claus, I. Alekseenko, F. Gloeckler, and S. Reichelt, “Coherence-gated digital holographic imaging through fog,” in Digital Holography and 3-D Imaging 2022, Optica Publishing Group, 2022, p. M2A. doi: 10.1364/DH.2022.M2A.2.
    5. R. Hahn, J. Görres, T. Haist, W. Osten, and S. Reichelt, “Novel snapshot hyperspectral imager based on diffractive elements,” in Optical Sensing and Detection VII, F. Berghmans and I. Zergioti, Eds., SPIE, 2022, p. 121390I. doi: 10.1117/12.2621521.
    6. S. Hartlieb, M. Boguslawski, T. Haist, and S. Reichelt, “Holographical image based vibrometry with monochromatic and event based cameras,” in Optics and Photonics for Advanced Dimensional Metrology II, P. J. de Groot, R. K. Leach, and P. Picart, Eds., SPIE, 2022, p. 1213702. doi: 10.1117/12.2621973.
    7. S. Hartlieb, C. Schober, T. Haist, and S. Reichelt, “Holographic single-image depth reconstruction,” in EPJ Web of Conferences, M. F. Costa, M. Flores-Arias, G. Pauliat, and P. Segonds, Eds., EDP Sciences, 2022, p. 10005. doi: 10.1051/epjconf/202226610005.
    8. G. Pedrini, A. Schiebelbein, E. Achimova, and V. Abashkin, “Lensless phase imaging microscopy by multiple intensity diffraction pattern,” in Unconventional Optical Imaging III, M. P. Georges, G. Popescu, and N. Verrier, Eds., SPIE, 2022, p. 1213605. doi: 10.1117/12.2620778.
    9. A. Savchenko et al., “Fabrication of sub-wavelength circular diffraction gratings for high-power laser applications,” DGaO Proceedings, 2022.
    10. A. Toulouse, J. Drozella, S. Thiele, H. Giessen, and A. M. Herkommer, “Complex 3D printed microoptical systems: from a pinhole camera to a spectrometer,” in 3D Printed Optics and Additive Photonic Manufacturing III, A. M. Herkommer, G. von Freymann, and M. Flury, Eds., SPIE, 2022, p. PC1213504. doi: 10.1117/12.2624165.
    11. K. Treptow, C. Schober, C. Pruss, A. Herkommer, and S. Reichelt, “Single-shot Interferometry apart from zero position measurement,” DGaO Proceedings, 2022.

  5. 2021

    1. A. Asadollahbaik et al., “Structured light to miniaturize optical micromanipulation,” in Optical Trapping and Optical Micromanipulation XVIII, K. Dholakia and G. C. Spalding, Eds., SPIE, 2021, p. 117981G. doi: 10.1117/12.2596522.
    2. S. Ludwig, G. Pedrini, X. Peng, and W. Osten, “Ensemble cross-correlation for image retrieval from the intensity signal recorded by a single pixel,” in Optical Measurement Systems for Industrial Inspection XII, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2021, p. 1178214. doi: 10.1117/12.2592727.
    3. S. Ristok, S. Thiele, A. Toulouse, A. M. Herkommer, and H. Giessen, “Stitching-free 3D printing of millimeter-sized highly transparent spherical and aspherical optical components,” in Conference on Lasers and Electro-Optics, Optica Publishing Group, 2021, p. ATh1R. doi: 10.1364/CLEO_AT.2021.ATh1R.1.
    4. F. Rothermel, S. Thiele, C. Jung, H. Giessen, and A. Herkommer, “Towards magnetically actuated 3D-printed micro-optical elements,” in Optomechanics and Optical Alignment, K. B. Doyle, J. D. Ellis, J. M. Sasián, and R. N. Youngworth, Eds., SPIE, 2021, p. 118160I. doi: 10.1117/12.2594213.
    5. C. Schober, C. Pruss, and A. Herkommer, “Integriertes Messkonzept zur Registrierung von Weißlichtinterferometriesignalen für Nanometrologie in großen Messvolumina,” DGaO Proceedings, 2021.

  6. 2020

    1. A. Asadollahbaik et al., “Efficient mirco- and nanoparticle trapping by improved optical fiber tweezers using 3D printed diffractive optical elements,” in Optical Trapping and Optical Micromanipulation XVII, K. Dholakia and G. C. Spalding, Eds., SPIE, 2020, p. 114631E. doi: 10.1117/12.2567647.
    2. A. Asadollahbaik et al., “Improved optical fiber tweezers using 3D printed Fresnel lenses (Conference Presentation),” in Nanophotonics VIII, D. L. Andrews, A. J. Bain, M. Kauranen, and J.-M. Nunzi, Eds., SPIE, 2020, p. 1134506. doi: 10.1117/12.2559875.
    3. V. Aslani and T. Haist, “Rauschreduktion durch den Einsatz von maschinellem Lernen in der Bildverarbeitung,” DGaO Proceedings, 2020.
    4. L. Fu, M. Daiber-Huppert, K. Frenner, and W. Osten, “Rigorous speckle simulator for large area rough surfaces using surface integral equations and multilevel fast multipole method,” DGaO Proceedings, 2020.
    5. F. Guerra, A. Warsewa, S. Hartlieb, T. Haist, W. Osten, and O. Sawodny, “Holographic point replication as a sensor-enhancing technique for adaptive building control,” in Photonic Instrumentation Engineering VII, Y. Soskind and L. E. Busse, Eds., SPIE, 2020, p. 112870Z. doi: 10.1117/12.2546226.
    6. R. Hahn et al., “Detailed characterization of a hyperspectral snapshot imager for full-field chromatic confocal microscopy,” in Optics and Photonics for Advanced Dimensional Metrology, P. J. de Groot, R. K. Leach, and P. Picart, Eds., SPIE, 2020, p. 113520Y. doi: 10.1117/12.2556797.
    7. T. Haist, A. Steinitz, and F. Guerra, “Increasing the accuracy of imaging-based dimensional measurements,” in Optics and Photonics for Advanced Dimensional Metrology, P. J. de Groot, R. K. Leach, and P. Picart, Eds., SPIE, 2020, p. 1135204. doi: 10.1117/12.2556800.
    8. S. Hartlieb et al., “Accurate 3D coordinate measurement using holographic multipoint technique,” in Optics and Photonics for Advanced Dimensional Metrology, P. J. de Groot, R. K. Leach, and P. Picart, Eds., SPIE, 2020, p. 1135203. doi: 10.1117/12.2555372.
    9. S. Hartlieb, F. Guerra, M. Tscherpel, R. Hahn, T. Haist, and W. Osten, “Anwendungsgebiete der Multipoint Technik in der 3D-Positionsmessung,” DGaO Proceedings, 2020.
    10. F. Rothermel, S. Thiele, C. Jung, and A. Herkommer, “Ansatz zur Aktuierung 3D-gedruckter Mikrooptiken mittels magnetischer Flüssigkeiten,” DGaO Proceedings, 2020.
    11. C. Schober, C. Pruß, and A. Herkommer, “Sensordesign für die NPMM-200 am Beispiel eines Weisslichtsensors,” DGaO Proceedings, 2020.
    12. C. Schober, C. Pruss, A. Herkommer, and W. Osten, “The NPMM-200: large area high resolution for freeform surface measurement,” in Seventh European Seminar on Precision Optics Manufacturing, O. W. Fähnle, G. Fütterer, R. Rascher, and A. Haberl, Eds., SPIE, 2020, p. 1147807. doi: 10.1117/12.2564918.
    13. S. Thiele, A. Toulouse, S. Ristok, H. Giessen, and A. Herkommer, “Translating optical design freedom into 3D printed complex micro-optics (Conference Presentation),” in 3D Printed Optics and Additive Photonic Manufacturing II, A. M. Herkommer, G. von Freymann, and M. Flury, Eds., SPIE, 2020, p. 1134904. doi: 10.1117/12.2559198.

  7. 2019

    1. S. Amann, Q. Duong-Ederer, T. Haist, B. Sierk, B. Guldimann, and W. Osten, “Characterization of fiber-based slit homogenizer devices in the NIR and SWIR,” in International Conference on Space Optics — ICSO 2018, Z. Sodnik, N. Karafolas, and B. Cugny, Eds., SPIE, 2019, p. 111806C. doi: 10.1117/12.2536147.
    2. S. Amann, T. Haist, and B. Sierk, “Charakterisierung von Homogenisierkomponenten für die satellitengestützte Messung von Treibhausgasen,” DGaO Proceedings, 2019.
    3. R. Beisswanger, C. Pruss, C. Schober, A. Harsch, and W. Osten, “Tilted wave interferometer in common path configuration: challenges and realization,” in Optical Measurement Systems for Industrial Inspection XI, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2019, p. 110561G. doi: 10.1117/12.2526175.
    4. T. Dietrich et al., “Thin-Disk Laser Emitting Beams with 980 W of CW-Output Power and Radial Polarization,” in 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), Jun. 2019, p. 1. doi: 10.1109/CLEOE-EQEC.2019.8871934.
    5. J. Drozella, A. Toulouse, S. Thiele, and A. M. Herkommer, “Fast and comfortable GPU-accelerated wave-optical simulation for imaging properties and design of highly aspheric 3D-printed freeform microlens systems,” in Novel Optical Systems, Methods, and Applications XXII, C. F. Hahlweg and J. R. Mulley, Eds., SPIE, 2019, p. 1110506. doi: 10.1117/12.2528843.
    6. A. Faulhaber, M. Gronle, S. Haberl, T. Buchholz, T. Haist, and W. Osten, “Dynamically scanned spot projections with digital holograms for reduced measurement uncertainty in laser triangulation systems,” in AOPC 2019: Optical Sensing and Imaging Technology, J. E. Greivenkamp, J. Tanida, Y. Jiang, H. Gong, J. Lu, and D. Liu, Eds., SPIE, 2019, p. 113383F. doi: 10.1117/12.2548075.
    7. A. Faulhaber et al., “Hybrid telecentric triangulation sensor system with real-time field-dependent deconvolution,” in Optical Measurement Systems for Industrial Inspection XI, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2019, p. 1105613. doi: 10.1117/12.2525568.
    8. F. Guerra, S. Hartlieb, A. Warsewa, T. Haist, W. Osten, and O. Sawodny, “Deformation measurement of large buildings by holographical point replication,” in Optics for Arts, Architecture, and Archaeology VII, H. Liang, R. Groves, and P. Targowski, Eds., SPIE, 2019, p. 110580G. doi: 10.1117/12.2525815.
    9. R. Hahn et al., “In-situ laser fabrication to reduce eccentricity errors in optical encoders,” in Conference on Lasers and Electro-Optics, Optica Publishing Group, 2019, p. JTu2A. doi: 10.1364/CLEO_AT.2019.JTu2A.12.
    10. T. Haist, C. Reichert, F. Würtenberger, L. Lachenmaier, and A. Faulhaber, “Kamerabasierte Erfassung von Vitalparametern,” tm - Technisches Messen, vol. 86, Art. no. 7–8, 2019, doi: doi:10.1515/teme-2019-0019.
    11. A. Harsch, A. Parvizi, C. Pruß, and W. Osten, “Eine effiziente Methode zur Beurteilung inverser Messverfahren,” DGaO Proceedings, 2019.
    12. A. Harsch, C. Pruss, G. Baer, and W. Osten, “Monte Carlo simulations: a tool to assess complex measurement systems,” in Sixth European Seminar on Precision Optics Manufacturing, R. Rascher and C. Schopf, Eds., SPIE, 2019, p. 111710C. doi: 10.1117/12.2526799.
    13. S. Hartlieb, M. Tscherpel, T. Haist, W. Osten, M. Ringkowski, and O. Sawodny, “Hochgenaue Kalibrierung eines Multipoint-Positionsmesssystems,” DGaO Proceedings, 2019.
    14. S. Ludwig, B. L. Teurnier, G. Pedrini, A. Herkommer, and W. Osten, “Deconvolution in Scatter-plate Microscopy,” in Imaging and Applied Optics 2019 (COSI, IS, MATH, pcAOP), Optica Publishing Group, 2019, p. CW4A. doi: 10.1364/COSI.2019.CW4A.3.
    15. E. Manske et al., “Scale spanning subnanometer metrology up to ten decades,” in Optical Measurement Systems for Industrial Inspection XI, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2019, p. 110560L. doi: 10.1117/12.2526076.
    16. G. Pedrini, A. Calabuig, G. Jagannathan, M. Kempenaars, V. G, and W. Osten, “Two-wavelengths digital holography for erosion measurements inside the ITER Tokamak,” in Optical Metrology and Inspection for Industrial Applications VI, S. Han, T. Yoshizawa, S. Zhang, and B. Chen, Eds., SPIE, 2019, p. 111890I. doi: 10.1117/12.2550453.
    17. C. Pruss, K. Frenner, and W. Osten, “NPMM200 – Sub-Nanometer-Positionierung in großen Volumina,” DGaO Proceedings, 2019.
    18. S. Reichelt, “Decomposition of non-rotationally symmetric wavefront aberrations into their azimuthal orders,” in Applied Optical Metrology III, E. Novak and J. D. Trolinger, Eds., SPIE, 2019, p. 111020B. doi: 10.1117/12.2528169.
    19. C. Reichert, T. Gruhonjic, K. Rishav, T. Haist, and A. Herkommer, “Ganzheitliche Optimierung von optischen Systemen,” DGaO Proceedings, 2019.
    20. A. Toulouse, S. Thiele, and A. Herkommer, “Virtual reality headset using a gaze-synchronized display system,” in Optical Design Challenge 2019, B. C. Kress, Ed., SPIE, 2019, p. 1104009. doi: 10.1117/12.2523920.

  8. 2018

    1. A. Baumgartner, S. Amann, C. Müller, A. Herkommer, M. Dressel, and S. Fella, “Infrared reflectance factor of various asphalts,” in Remote Sensing for Agriculture, Ecosystems, and Hydrology XX, C. M. U. Neale and A. Maltese, Eds., SPIE, 2018, p. 107831X. doi: 10.1117/12.2325509.
    2. R. Beisswanger, C. Pruß, and W. Osten, “Interferometrische Radienbestimmung unter nicht konstanten Umgebungsbedingungen,” DGaO Proceedings, 2018.
    3. B. Chen, S. Thiele, M. Xu, and A. M. Herkommer, “Micro objectives with extremely large field of view,” in Optical Design and Engineering VII, L. Mazuray, R. Wartmann, and A. P. Wood, Eds., SPIE, 2018, p. 1069016. doi: 10.1117/12.2313400.
    4. A. Haberl et al., “Model based error separation of power spectral density artefacts in wavefront measurement,” in Interferometry XIX, K. Creath, J. Burke, M. B. N. Morris, and A. D. Davies, Eds., SPIE, 2018, p. 107490T. doi: 10.1117/12.2321106.
    5. T. Haist, Optische Phänomene in Natur und Alltag. Universität Stuttgart, 2018. [Online]. Available: http://www.optipina.de
    6. A. Harsch, C. Pruss, A. Haberl, and W. Osten, “Tilted wave interferometry for testing large surfaces,” in Fifth European Seminar on Precision Optics Manufacturing, R. Rascher and C. Schopf, Eds., SPIE, 2018, p. 1082908. doi: 10.1117/12.2318573.
    7. A. Hartung, S. Thiele, J. Drozella, H. Giessen, and A. Herkommer, “Schwärzen von 3D-gedruckten Mikrooptiken mittels Inkjet-Verfahren,” DGaO Proceedings, 2018.
    8. A. Herkommer and S. Thiele, “Design und Herstellung von 3D-gedruckten mikrooptischen Systemen mittels 2-Photonen Polymerisation,” DGaO Proceedings, 2018.
    9. H. Li, L. Fu, K. Frenner, and W. Osten, “A cascaded plasmonic superlens for far-field imaging with magnification at visible wavelength,” DGaO Proceedings, 2018.
    10. S. Lotz, C. Reichert, T. Haist, and A. Herkommer, “„BaKaRoS“ – ein Baukastensystem für einen niederschwelligen Zugang zur technischen Optik,” DGaO Proceedings, 2018.
    11. S. Ludwig, A. K. Singh, G. Pedrini, and W. Osten, “Scatter-plate microscope: improved image acquisition,” in Unconventional Optical Imaging, C. Fournier, M. P. Georges, and G. Popescu, Eds., SPIE, 2018, p. 1067717. doi: 10.1117/12.2306252.
    12. W. Osten, T. Haist, and E. Manske, “How to drive an optical measurement system to outstanding performance,” Ultra-High-Definition Imaging …, 2018, [Online]. Available: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/10557/105570Q/How-to-drive-optical-measurement-systems-to-outstanding-performance/10.1117/12.2300856.short
    13. G. Pedrini, I. Alekseenko, G. Jagannathan, M. Kempenaars, G. Vayakis, and W. Osten, “Digital holography for erosion monitoring inside the ITER Tokamak,” in Unconventional Optical Imaging, C. Fournier, M. P. Georges, and G. Popescu, Eds., SPIE, 2018, p. 1067722. doi: 10.1117/12.2307333.
    14. G. Pedrini, I. Alekseenko, W. Osten, G. Jagannathan, M. Kempenaars, and G. Vayakis, “Multi-Wavelength Digital Holography for Erosion Measurements inside the ITER Tokamak,” in Imaging and Applied Optics 2018 (3D, AO, AIO, COSI, DH, IS, LACSEA, LS&C, MATH, pcAOP), Optica Publishing Group, 2018, p. DW3F. doi: 10.1364/DH.2018.DW3F.1.
    15. C. Pruß and W. Osten, “Asphären- und Freiformflächenmesstechnik: Herausforderungen im Spannungsfeld zwischen Flexibilität und Kalibrierung,” DGaO Proceedings, 2018.
    16. C. Reichert, F. Würtenberger, V. Hinderer, T. Haist, and A. Herkommer, “Erfassung menschlicher Vitalparameter mithilfe optischer Messtechnik,” DGaO Proceedings, 2018.
    17. F. Rothermel, C. Pruß, A. Herkommer, and W. Osten, “In-Prozess Messtechnik für 3D-gedruckte Optiken,” DGaO Proceedings, 2018.

  9. 2017

    1. A. Bielke, C. Pruß, and W. Osten, “Streulichtreduzierung bei einem variablen Interferometer-Objektiv mit zwei diffraktiven Elementen,” DGaO Proceedings, 2017.
    2. B. Chen and A. M. Herkommer, “Surface Resolved Aberration Contributions in Freeform Optical Systems,” in Optical Design and Fabrication 2017 (Freeform, IODC, OFT), Optica Publishing Group, 2017, p. JTu1C. doi: 10.1364/FREEFORM.2017.JTu1C.3.
    3. T. Dietrich et al., “CW thin-disk laser emitting kW-class beams with radial polarization,” in 2017 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC), Jun. 2017, p. 1. doi: 10.1109/CLEOE-EQEC.2017.8086260.
    4. H. Li, L. Fu, K. Frenner, and W. Osten, “Nanofabrication results of a novel cascaded plasmonic superlens: lessons learned,” in Modeling Aspects in Optical Metrology VI, B. Bodermann, K. Frenner, and R. M. Silver, Eds., SPIE, 2017, p. 103300Y. doi: 10.1117/12.2275586.
    5. C. Pruss et al., “High power polarization shaping utilizing sub-lambda-grating structures,” in EOS Topical meeting on Diffractive Optics, EOS, 2017.
    6. C. Pruß et al., “Sub-lambda Polarisationsformer für Hochleistungslaser,” DGaO Proceedings, 2017.
    7. J. Schindler, C. Pruss, and W. Osten, “Increasing the accuracy of tilted-wave-interferometry by elimination of systematic errors,” in Optical Measurement Systems for Industrial Inspection X, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2017, p. 1032904. doi: 10.1117/12.2270395.
    8. H. Yang, T. Haist, M. Gronle, and W. Osten, “Simulated BRDF based on measured surface topography of metal,” in Automated Visual Inspection and Machine Vision II, J. Beyerer and F. P. León, Eds., SPIE, 2017, p. 1033405. doi: 10.1117/12.2269978.

  10. 2016

    1. D. Buchta, D. Claus, G. Pedrini, and W. Osten, “Depth-resolved Hyperspectral Digital Holography,” in Digital Holography and Three-Dimensional Imaging, OSA, 2016. doi: 10.1364/dh.2017.w4a.3.
    2. D. Claus, J. Thiem, J. Hennenlotter, G. Pedrini, A. Stenzl, and W. Osten, “Iterative phase retrieval imaging based on variable wavefront curvature for biomedical imaging,” in Imaging and Applied Optics 2016, Optica Publishing Group, 2016, p. JW4A. doi: 10.1364/3D.2016.JW4A.25.
    3. T. Haist, Autonomes Fahren: Eine kritische Beurteilung der technischen Realisierbarkeit. elib.uni-stuttgart.de, 2016. [Online]. Available: http://elib.uni-stuttgart.de/handle/11682/8881
    4. M. Hasler, T. Haist, and W. Osten, “Adjustment and Application of Spatial Light Modulators for Holography,” in Imaging and Applied Optics 2016, Optica Publishing Group, 2016, p. DW1D. doi: 10.1364/DH.2016.DW1D.1.
    5. G. Pedrini, V. Martínez-García, P. Weidmann, A. Singh, and W. Osten, “Optical methods for the analysis of residual stresses and measurement of displacements in the nanometric range,” in 2016 IEEE 14th International Conference on Industrial Informatics (INDIN), Jul. 2016, pp. 570–575. doi: 10.1109/INDIN.2016.7819227.
    6. G. Pedrini, D. Claus, and W. Osten, “Digital holography using wavefront scanning,” in Imaging and Applied Optics 2016, Optica Publishing Group, 2016, p. DW5E. doi: 10.1364/DH.2016.DW5E.3.
    7. H. Yang, T. Haist, M. Gronle, and ..., “Realistic simulation of camera images of micro-scale defects for automated defect inspection,” Forum Bildverarbeitung …, 2016, [Online]. Available: https://books.google.com/books?hl=en&lr=&id=_IefDQAAQBAJ&oi=fnd&pg=PA63&dq=%22t+haist%22&ots=tyU4a1RJdy&sig=j1LLq90hD1IqhQ2Q5BB8GV9i7XU
    8. M. Zhou, A. K. Singh, G. Pedrini, W. Osten, and B. Yao, “Speckle-correlation Microscopic Imaging through Scattering Medium,” in Imaging and Applied Optics 2016, Optica Publishing Group, 2016, p. DT1E. doi: 10.1364/DH.2016.DT1E.2.

  11. 2015

    1. A. Bielke, G. Baer, C. Pruss, and W. Osten, “Model-based calibration of an interferometric setup with a diffractive zoom-lens,” in 2015 International Conference on Optical Instruments and Technology: Optical Systems and Modern Optoelectronic Instruments, Y. Wang, X. Tan, and K. Tatsuno, Eds., SPIE, 2015, p. 961807. doi: 10.1117/12.2191579.
    2. D. Buchta, N. Hein, G. Pedrini, C. Krekel, and W. Osten, “Combination of topology and structural information for damages and deterioration analysis of artworks,” in Optics for Arts, Architecture, and Archaeology V, L. Pezzati and P. Targowski, Eds., SPIE, 2015, p. 95270Q. doi: 10.1117/12.2184690.
    3. T. Haist et al., “Towards one trillion positions,” in Automated Visual Inspection and Machine Vision, J. Beyerer and F. P. León, Eds., SPIE, 2015, p. 953004. doi: 10.1117/12.2184636.
    4. W. Osten, G. Pedrini, P. Weidmann, and R. Gadow, “A flexible method for residual stress measurement of spray coated layers by laser made hole drilling and SLM based beam steering,” in SPECKLE 2015: VI International Conference on Speckle Metrology, F. M. Santoyo and E. R. Mendez, Eds., SPIE, 2015, p. 96600H. doi: 10.1117/12.2196869.
    5. A. K. Singh, D. N. Naik, G. Pedrini, M. Takeda, and W. Osten, “Real-time imaging through thin scattering layer and looking around the opaque surface,” in Digital Holography & 3-D Imaging Meeting, Optica Publishing Group, 2015, p. DTh3A. doi: 10.1364/DH.2015.DTh3A.5.
    6. H. Yang, T. Haist, M. Gronle, and W. Osten, “Realistic simulation of camera images of local surface defects in the context of multi-sensor inspection systems,” in Optical Measurement Systems for Industrial Inspection IX, P. Lehmann, W. Osten, and A. A. G. Jr., Eds., SPIE, 2015, p. 952522. doi: 10.1117/12.2184612.

  12. 2014

    1. A. Bielke, C. Pruss, and W. Osten, “Experimental demonstration of a diffractive zoom-lens for an interferometric setup,” in Classical Optics 2014, Optica Publishing Group, 2014, p. OTu4A. doi: 10.1364/OFT.2014.OTu4A.3.
    2. S. Dong, T. Haist, T. Dietrich, and W. Osten, “Hybrid curvature and modal wavefront sensor,” in Unconventional Imaging and Wavefront Sensing 2014, J. J. Dolne, T. J. Karr, and V. L. Gamiz, Eds., SPIE, 2014, p. 922702. doi: 10.1117/12.2058849.
    3. A. Faridian, G. Pedrini, and W. Osten, “High-contrast 3D microscopic imaging of deep layers in a biological medium,” in Three-Dimensional and Multidimensional Microscopy: Image Acquisition and Processing XXI, T. G. Brown, C. J. Cogswell, and T. Wilson, Eds., SPIE, 2014, p. 89490H. doi: 10.1117/12.2037310.
    4. V. M. Garc\’ıa, G. Pedrini, A. Killinger, R. Gadow, and W. Osten, “Residual Stress Analysis on Thermally Sprayed Coatings by Means of Optical and Mechanical Methods,” in International Thermal Spray Conference, R. S. Lima, A. Agarwal, M. M. Hyland, Y.-C. Lau, G. Mauer, A. McDonald, and F.-L. Toma, Eds., DVS Media GmbH, May 2014. doi: 10.31399/asm.cp.itsc2014p0190.
    5. M. P. Georges et al., “Speckle interferometry at 10 micrometers wavelength: a combined thermography and interferometry technique and its application in aeronautical nondestructive testing,” in Interferometry XVII: Advanced Applications, C. Furlong, C. Gorecki, P. J. de Groot, and E. L. Novak, Eds., SPIE, 2014, p. 92040F. doi: 10.1117/12.2062816.
    6. M. P. Georges et al., “Combined holography and thermography in a single sensor through image-plane holography at thermal infrared wavelengths,” Optics Express, vol. 22, Art. no. 21, Oct. 2014, doi: 10.1364/oe.22.025517.
    7. T. Haist, M. Gronle, T. Arnold, D. Bui, and ..., “Verbesserung von Positions-bestimmungen mittels holografischer Mehrpunktgenerierung,” Forum …, 2014, [Online]. Available: https://books.google.com/books?hl=en&lr=&id=s8CiBQAAQBAJ&oi=fnd&pg=PA239&dq=%22t+haist%22&ots=wkI4RaaN75&sig=7jfkYWMB2Hz-09BS2Y_RFVSAJqY
    8. C. Lingel, M. Hasler, T. Haist, G. Pedrini, and W. Osten, “A benchmark system for the evaluation of selected phase retrieval methods,” in Optical Micro- and Nanometrology V, C. Gorecki, A. K. Asundi, and W. Osten, Eds., SPIE, 2014, p. 91320R. doi: 10.1117/12.2057472.
    9. C. Pruss, G. Baer, J. Schindler, and W. Osten, “Flexibility and rapid measurement: asphere and freeform metrology with Tilted Wave Interferometry,” in Classical Optics 2014, Optica Publishing Group, 2014, p. OW2B. doi: 10.1364/OFT.2014.OW2B.1.
    10. F. Schaal, T. Haist, A. Peter, A. Beeck, and ..., “Applications of diffractive optical elements for optical measurement techniques,” Proc. SPIE, 2014, [Online]. Available: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/9271/927105/Applications-of-diffractive-optical-elements-for-optical-measurement-techniques/10.1117/12.2071106.short
    11. F. Schaal, T. Haist, A. Peter, A. Beeck, C. Pruss, and W. Osten, “Applications of diffractive optical elements for optical measurement techniques,” in Holography, Diffractive Optics, and Applications VI, Y. Sheng, C. Yu, and C. Zhou, Eds., SPIE, 2014, p. 927105. doi: 10.1117/12.2071106.
    12. J. Schindler, G. Baer, C. Pruss, and W. Osten, “The tilted-wave-interferometer: freeform surface reconstruction in a non-null setup,” in International Symposium on Optoelectronic Technology and Application 2014: Laser and Optical Measurement Technology; and Fiber Optic Sensors, J. Czarske, S. Zhang, D. Sampson, W. Wang, and Y. Liao, Eds., SPIE, 2014, p. 92971R. doi: 10.1117/12.2073053.
    13. A. K. Singh, D. N. Naik, G. Pedrini, M. Takeda, and W. Osten, “Looking around the corner and through a diffuser: different approaches,” in Imaging and Applied Optics 2014, Optica Publishing Group, 2014, p. DTu3B. doi: 10.1364/DH.2014.DTu3B.3.

  13. 2013

    1. T. Haist, C. Lingel, W. Osten, K. Bendel, and ..., “Characterization and demonstration of a 12-channel laser-Doppler vibrometer,” Proc. SPIE, 2013, [Online]. Available: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/8788/87881V/Characterization-and-demonstration-of-a-12-channel-Laser-Doppler-vibrometer/10.1117/12.2020475.short
Zum Seitenanfang